Response Groups - Yealink SIP-T22P User Manual

2. Press
International field.
3. Press the Save soft key.
Forward international is configurable via web user interface at the path Features ->
General Information.
When a caller calls a response group, the call will be routed to the available member. If
a member in the response group does not answer the call or reject the call, the call will
be routed to the next available member. If no members are available, the call is held in
a queue until a member is available.
For example, a response group named "yealink" is configured in advance. User A is an
available member in the group. When a user named "Hedy" calls the response group
via Lync client, the LCD screen of the phone is shown as below:
Note
Response group should be configured in advance by administrator. Contact your
system administrator for more information.
You can call the response group via Lync client only.
Lync Server can specify a private line to user in addition to their primary line. Private
lines are often assigned to boss or executives, who need to deal with some important or
confidential calls. When the boss or executive receives a private call, only his/her phone
rings even though a secretary has been designated as his/her delegate for ring
simultaneously feature.
For example, an executive has designated his secretary to be his delegate whose
phone will ring simultaneously when the executive receives an incoming call.
or , or the Switch soft key to select Disable from the FWD
Basic Call Features
53