Emergency Call - Yealink SIP-T22P User Manual

User Guide for the SIP-T22P/SIP-T22 IP Phone
Location is configurable via web user interface at the path Settings->Location.
To view the location information via phone user interface:
Do one of the following:
Press Menu->Settings->Basic Setting->Location.
-
Press
-
You can dial emergency numbers for assistance. Emergency numbers should be
configured on Lync server in advance.
You can dial an Emergency Dial String number or Emergency Dial String Mask number
even if the phone is locked, and keypad is available during an emergency call. With or
without the location information will not affect you to dial an emergency call.
When you dial an Emergency Dial String number or Emergency Dial String Mask
number, the LCD screen is shown as below:
You can cancel or hold the emergency call only.
If call forward feature is configured in advance, the call forward feature will be
disabled automatically after calling the emergency number. If the call forward feature
is not manually enabled again after the emergency call, it will be enabled
automatically after two hours and its settings will also be recovered.
If the phone status is DND before dialing an emergency number, then the phone status
will change to available after the emergency call. Other statuses will not be affected by
the emergency call.
Note
Emergency numbers can be configured on Lync server only. Contact your system
administrator for more information.
You can enable live dialpad on the SIP-T22P/SIP-T22 IP phone, which enables the IP
phone to automatically dial out the entered phone numbers without pressing any other
34
->More...-> Location.