Sustain Mode - M-Audio Keystation Mini 32 User Manual

To select a new Velocity Curve:
1. Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.
2. Press the "VELOCITY" key (G, 5th white key from the left).
3. Use the Numerical Data Entry keys (0 - 9) to enter the number of the Velocity Curve you want to use.
If you have made an error while entering the Effect number, you can press the "CANCEL" key (C, first
white key on the left) to exit Edit Mode without making any changes.
As an alternative to step 3, you can use the "+" and "-" buttons to change the value.
4. Press the "Enter" key G (last white key on the right) to commit the change. The Edit button will dim to
normal half brightness indicating that programming is complete.
The Velocity Curve setting is retained when the keyboard is turned off.
To return the Velocity Curve to the default setting, perform the following steps:
1. Press the Edit button to engage Edit Mode. The Edit button light will illuminate to full brightness.
2. Press G (5th white key from the left), representing "Velocity."
3. Press C (8th white key from the left), representing "Default", the Edit light will dim to half brightness
indicating that programming is complete.

Sustain Mode

The Sustain button can work in two different modes called Latching and Momentary. Latching mode is the
default setting in which momentarily pressing the Sustain button and playing a note causes it to sustain after
it has been played without keeping your hands on the keyboard. However, the sound will not stop until the
button is pressed again.
Momentary mode works in the same manner as a traditional sustain pedal, such that holding the Sustain
button down and playing a note causes it to sustain until the button is released.
To change the Sustain mode from Latching to Momentary:
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "SUSTAIN MODE" key (A, 6th white key from the left). The Edit mode button will dim to half
brightness indicating that programming is complete.
Now holding the Sustain button down and playing a note will cause it to sustain until the button is released.
The Sustain Mode setting is retained when the keyboard is turned off.
To return the Sustain button to Latching mode (default):
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "SUSTAIN MODE" key (A, 6th white key from the left). The Edit mode button will dim to half
brightness indicating that programming is complete.
Now pressing the Sustain button and playing a note will cause it to sustain until the button is pressed a
second time.
13