Sustain Mode - M-Audio Keystation Mini 32 User Manual

To select a new Velocity Curve:
Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.
1
Press the "VELOCITY" key (G, 5th white key from the left).
2
Use the Numerical Data Entry keys (0 - 9) to enter the number of the Velocity Curve you want to use.
3
If you have made an error while entering the Effect number, you can press the "CANCEL" key (C, first white key on the
left) to exit Edit Mode without making any changes.
As an alternative to step 3, you can use the "+" and "-" buttons to change the value.
Press the "Enter" key G (last white key on the right) to commit the change. The Edit button dim to normal
4
half brightness indicating that programming is complete.
The Velocity Curve setting is retained when the keyboard is turned off.
To return the Velocity Curve to the default setting perform the following steps:
Press the Edit button to engage Edit Mode. The Edit button light will illuminate to full brightness.
1
Press G (5th white key from the left), representing "Velocity."
2
Press C (8th white key from the left), representing "Default", the Edit light will dim to half brightness in-
3
dicating that programming is complete.

Sustain Mode

The Sustain button can work in two different modes called Toggle and Gate. Toggle mode is the default setting
in which momentarily pressing the Sustain button and playing a note causes it to sustain after it has been
played without keeping your hands on the keyboard. However, the sound will not stop until the button is
pressed again.
Gate mode works in the same manner as a traditional sustain pedal, such that holding the Sustain button
down and playing a note causes it to sustain until the button is released.
To change the Sustain mode from Toggle to Gate:
Press the Edit button. The Edit button light will illuminate to full brightness.
1
Press the "SUSTAIN MODE" key (A, 6th white key from the left). The Edit mode button will dim to half
2
brightness indicating that programming is complete.
Keystation Mini 32 User Guide
21
Chapter 4: Edit Mode