Store A Memory Number; Dial A Memory Number; Erase A Memory Number - AT&T 982 User Manual

982_CIB_3ATT 2/4/05
w w w w w w w w w
w w w w w w
€ € €
€ €
w w w
w w
w w w w w w
w w w w
€ € €
€ €
w w w
w w
❙ ❙ ❙
❙ ❙
w w w
w w
❘ ❘ ❘
❘ ❘
❖ ❖ ❙ ❖ ❙ ❙
❖ ❖ ❙ ❙
w w w
w w
9:52 AM Page 19

Store a Memory Number

Press K, press h or lift the handset.
1
Press and release G. You will hear a beep.
2
3 Enter the telephone number you want to store
(up to 24 digits) or press a to store
the last number dialed. You will hear a beep each
time you press a button. Press P to store a
three-second dialing delay.
4 Press and release a memory button
— OR —
Press and release l, then a memory button.
You will hear a two-beep confirmation tone.
5 Hang up.
Repeat Steps 1-5 to store another number.
If you hear a series of five beeps, an error was made.
Repeat Steps 1-5 in order to repeat the number you
wish to store.
NOTE: You cannot store a pause as the first digit
of a memory number.

Dial a Memory Number

Press L or l.
1
2 Lift the handset
— OR —
Press K
— OR —
Press h and listen for dial tone.
3 Press and release a memory button
— OR —
Press and release l then a memory button.

Erase a Memory Number

To remove a number from memory, enter another number
in the same location. To clear a memory location and
leave it empty,
Press L or l, then lift the handset.
1
Press G.
2
3 Press the button of the memory location you
want to clear.
19