Switch Between Handset, Headset, And Speakerphone; Ringer Volume; Handset/Speakerphone/Headset Volume - AT&T 982 User Manual

982_CIB_3ATT 2/4/05
❙ ❙ ❙
❙ ❙
w w w
w w
❙ ❙ ❙
❙ ❙
x x x
x x
❙ ❙ ❙
❙ ❙
❙ ❙ ❙
❙ ❙
12
9:52 AM Page 12
Switch Between Handset, Headset,
and Speakerphone
To switch from handset to headset or
speakerphone, press h or K.
To switch from headset or speakerphone to
handset, lift the handset. The headset or speakerphone
is automatically turned off.
To switch between speakerphone and headset,
press the button (h or K) for the mode
you wish to use.
NOTE: In order to use the headset you must have
properly installed batteries and an industry standard
2.5 mm headset must be plugged into the phone.
See "Headset Jack" on page 10 for instructions.

RINGER Volume

There is a RINGER switch for each line on the right side
of the telephone base.
Set each switch to OFF, LO or HI. You can dial and answer
calls normally with one or both switches set to OFF.
NOTE: Each line has its own distinctive ring.
Handset/Speakerphone/
Headset Volume
While on a call press VOLUME + to increase, or
VOLUME - to decrease volume.
You will hear a triple-beep when you reach the maximum
or minimum volume setting.