Using A Headset - Inter-Tel Axxess Standard Display User Manual

U H
SING A EADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE:
If your headset has a power-saver mode, make sure the System Administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
Unplug the coiled handset cord from the base of the phone. (Leave the handset in
1.
the cradle.)
Insert the headset plug into the vacant handset jack.
2.
While on-hook, enter the Headset On feature code (
3.
On/Off feature code (
To disconnect a headset:
Unplug the headset cord from the base of the phone.
1.
Plug the coiled handset cord into the vacant jack.
2.
While on-hook, enter the Headset Off feature code (
3.
On/Off feature code (
NOTE:
If using a headset, press
Axxess Standard Display and Basic Digital Phone User Guide
). The display shows HEADSET MODE ON.
3 1 7
). The display shows HEADSET MODE OFF.
3 1 7
to connect and disconnect calls.
SPKR
) or the Headset
3 1 5
) or the Headset
3 1 6
23