Set Time - AT&T EP5632/EP5632-2 User Manual

System setup
Settings

Set Time

Edit Handset Name
Show Handset Name
Keypad Tone
Language
Set Time
12:00 AM
SET
Edit Handset Name
HANDSET 2
SAVE
ERASE
NOTE: If no characters
are entered for the handset
name, Name must not be
empty will be shown on
the display. Enter a name
for the handset.
Set Time
If you subscribe to caller ID service provided by
your local telephone company, the time will
automatically be set with an incoming HOME call.
To manually set the time:
1. Press MENU/
main menu.
2. Press the UP or DOWN Navkeys to select
Settings, then press
Settings menu.
/SELECT to select Set Time.
3. Press
MENU
4. Use the dial pad (0-9) to enter the hour (01-12)
and minutes (00-59). Use the dial pad to enter 2
for AM and 7 for PM. You can also use the UP
and DOWN Navkeys to set the hour, m i n u t e s ,
and AM/PM.
5. Press the SET softkey or
the setting.
NOTES:
1. If Invalid Time appears on the display, make sure you are
entering 01-12 for the hour and 00-59 for the minutes.
2. If you do not subscribe to caller ID service, you will need to
set the time on each handset.
Edit Handset Name
The handset name can be up to 15 characters
including spaces.
To edit the handset name:
1. Follow steps 1 and 2 in the above section.
2. Press the DOWN Navkey to highlight Edit
Handset Name, then press
• Press the LEFT and RIGHT NavKey to move
the cursor left and right.
• Press the ERASE softkey to delete highlighted
characters.
• Use the dial pad to enter up to 15
alphanumeric characters (see page 68).
3. Press the SAVE softkey or
the setting.
31
in idle mode to enter the
SELECT
/SELECT to enter the
MENU
MENU
MENU
MENU
/SELECT to save
/SELECT.
/SELECT to save