Bluetooth Setup - AT&T EP5632/EP5632-2 User Manual

Bluetooth
NOTE: To learn
how to operate your
Bluetooth devices with
the telephone base, see
the Telephone operation
section (page 55).
12:00 AM
REDIAL MENU
Main Menu
Directory
Call Log
Answering System
Select
Main Menu
Call Log
Answering System
Bluetooth
Select
Bluetooth
Set up Cellular
Set up Headset
Active Devices
Select

Bluetooth Setup

To use a Bluetooth enabled cellular phone or
headset with your EP5632/EP5632-2, you must
first pair and connect your Bluetooth device(s)
with the telephone base. In the
section, you can setup a cellular phone (page 23)
and headset (page 24). In In Managing your Devices
section, you can view and modify the information
about your Bluetooth device(s) (page 25).
To enter the Bluetooth menu:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN Navkeys to highlight
CID
Bluetooth, then press the SELECT softkey. You
can then select:
While in the Bluetooth menu:
• Press CANCEL to return to a previous menu.
• Press and hold CANCEL on the telephone base
to return to the idle screen.
See the Troubleshooting section on page 92 if you
experience difficulty pairing or connecting your
Bluetooth device(s).
• Set up Cellular - set up a Bluetooth enabled
cellular phone (page 23).
• Set up Headset - set up a Bluetooth
enabled headset (page 24).
• Active Devices - replace, remove, view
the current status of, and connect to your
paired Bluetooth device(s) (page 27).
• Paired Devices - rename, delete, and view
information about your paired devices
(page 25).
• Change PIN - change the PIN of the
telephone base (page 29).
22
n the Bluetooth Setup
to highlight to highlight