Managing Your Devices - AT&T EP5632/EP5632-2 User Manual

Bluetooth
NOTE: To use a
To use a
paired device, it must be
connected, and on the
Active Devices list
(page 27).
Paired Devices
John's Cell
Mary's Cell
Mary's Headset
RENAME INFO DELETE
Rename Device
Edit Name
John's Cell
done
NOTE: Only the
first 16 characters of the
device name appears on
the Paired Devices list.

Managing your devices

Once you have paired a Bluetooth device, you can
rename, delete, and view the device's information
in the Paired Devices list.
Once a Bluetooth device is connected to the
telephone base, you can replace, remove or
disconnect the device from the Active Devices list
(page 27), and view the device's status information
(page 27).
Paired Devices
All paired devices are stored on the Paired Devices
list. Up to eight devices (any combination of cell
phones and headsets) can be paired with the
telephone base.
If a device is successfully paired, the icon
cell phone) or
device will be shown on the Paired Devices list.
Rename a paired device
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN NavKeys to highlight
Bluetooth, then press the SELECT softkey to
enter the Bluetooth menu.
3. Press the UP and DOWN NavKeys to highlight
Paired Devices, then press the SELECT softkey.
4. Press the UP and DOWN NavKeys to highlight
the name of the device to rename.
5. Press the RENAME softkey to rename a device.
Erase
6. Press the DONE softkey to save the setting.
(for headset) and the name of the
• Press the LEFT and RIGHT Navkeys to move
the cursor left and right.
• Press the ERASE softkey to delete highlighted
characters.
• Use the dial pad to enter the name (up to 16
characters). See the character chart on page 68
for more information on how to enter a name.
25
(for