Handset Status Icons - AT&T EP5632 User Manual

Getting started

Handset status icons

1
2
12:00AM
12:00AM
HANDSET 1
REDIAL
CALLER ID
12:00AM
Time - indicates the handset time.
New answering system message - alternates with the time when you
have a new answering system message.
New voice mail message - alternates with the time when you have a
new voice mail message.
HOME line - on steady when the HOME line is in use. Flashes slowly
when a HOME call is on hold. Flashes rapidly when there is an incoming
HOME call.
1 CELLULAR (cell phones 1 or 2) - depending on which cell phone is
active, on steady when the CELLULAR line is in use. Flashes slowly when
2
a CELLULAR call is on hold. Flashes rapidly when there is an incoming
CELLULAR call.
Bluetooth Active Devices - the telephone base is searching for the
Bluetooth device(s) on the Active Devices list (page 27).
1
Connected Active Devices - indicates that the Bluetooth device 1 and/
2
or 2 are connected and on the Active Devices list. On steady means that
the device is connected. Flashes when it is in the process of connecting
to the device.
1 2
Disconnected Active Devices - a line through the device number (1
and/or 2) indicates the device is disconnected from the telephone base.
Wireless Bluetooth headset - on steady when a Bluetooth headset is
in use on the HOME line. Flashes when a connected Bluetooth headset
is available to answer an incoming HOME call.
Ringer off - on steady when the HOME, CELL1, and CELL2 ringers are
off. Flashes when one or two of the HOME, CELL1, or CELL2 ringers
are off.
Battery status - shows the approximate battery charge level. Flashes
red when the battery is low and animates when charging.
4