Setup Cellular - AT&T EP5632 User Manual

Bluetooth
NOTE: If you a
device connected to the
telephone base when
pairing, Connected
deviceswill be
temporarily disconnected
will appear on the display.
12:00 AM
REDIAL MENU
Main Menu
Call Log
Answering System
Bluetooth
Select
Bluetooth
Set up Cellular
Set up Headset
Active Devices
Select
Set up Cellular
Set your Cellular to
search for devices,
then press NEXT
Next
Set up Cellular
AT&T EP5632 in
Discoverable Mode
PIN = 0000
STOP
Set up Cellular
Pairing complete
Connect to
Cellular?
YES
Cellular setup
completed
Set up Cellular
Before you begin, make sure that your Bluetooth
enabled cellular phone is not connected to any
other Bluetooth device. Refer to your cellular
phone's user's manual to learn how to search for
or add new Bluetooth devices.
To pair and connect a cellular phone:
1. Using the telephone base, press the
softkey while in idle mode.
Press the UP and DOWN Navkeys to highlight
2. Press the
Bluetooth, then press the SELECT softkey to
CID
enter the Bluetooth menu.
3. Press the SELECT softkey to enter the Set up
Cellular menu.
• If a device is already connected to the
4. Press the NEXT softkey to set the telephone
base in discoverable mode.
5. Using your cellular phone, turn on the Bluetooth
feature on your cellular phone, and search for or
add new devices.
6. Once your cellular phone has found the AT&T
EP5632 telephone base, select it.
7. Using your cellular phone, enter the PIN of the
telephone base (the default PIN is 0000) to
continue the pairing process.
8. Using the telephone base, press the YES softkey
to connect to your cellular phone when the
pairing process is complete.
HELP
• If successful, Cellular setup completed will
• If you already have two devices on the Active
No
When a device is connected, the
status icons will appear on the display.
telephone base, press the OK softkey to
temporarily disconnect the device(s) and
continue the pairing process.
appear on the telephone base display.
Devices list, press the YES softkey to connect
to your paired cellular phone. You will then
be prompted to replace an existing device on
the Active Devices list (page 27).
23
Refer to your cellular
press the MENU
to highlight
the 1 and/or 2