Table of Contents
Advertisement
8. INTERNAL CONTROLS TOUCH DISPLAY
The stove has a modern programmable microprocessor control. The individual
stove functions can be set by the user via the touch display.
Note
Manipulation of hardware components may only be performed by trained
specialist dealers and service. Incorrect handling of these parts leads to
loss of warranty and guarantee claims!
Basics
All settings and functions can be made via the integrated touch screen. Actions
are initiated by touching the symbolic buttons. The touch display reacts to both
finger touch and touch display pen.
Note
Please do not use any sharp objects to prevent damage to the touch display.
Operation
Each input button has the status inactive, active and depressed. If an input
button on the display is greyed-out, i.e. inactive, then it only reserves space
and cannot be selected. This is the case if no response can be expected from
pressing this input button (e.g. increasing the heat output if it is already at
100%; switching on if the stove is already switched on, ...)
Active input buttons can be pressed at any time, in confirmation the status
changes to depressed; this status is retained as long as the button is pressed.
After pressing the input button, the status returns to active or inactive.
active
Input Possibilities
OFF-Button
Pressing the OFF button switches off the section concerned.
ON-Button
Pressing the ON button switches on the section concerned.
If the stove is switched off, the OFF button can't be pressed a second time and
is therefore grayed out (inactive), only the ON button is active.
It is the same for an active stove, then only the OFF button is active.
Note
The stove is switched ON or OFF in the HOME main menu. The respective
button must be depressed for 2 seconds to prevent inadvertent switching
on or off.
MINUS-Button
Pressing the MINUS button reduces the value in the display box
concerned.
PLUS-Button
Pressing the PLUS button increases the value in the display box
concerned.
depressed
inactive
NAVIGATION-Button
Pressing the NAVIGATION button takes the user to the
corresponding main menu.
INPUT-BOX
328
There is an input box for input of a multi-digit, numerical value.
|
A number inserted in the field is deleted if you touch it.
NUMERICAL
A number pad appears for input of a multi-digit, numerical value.
ENTER-Button
The input value is confirmed by pressing the ENTER button.
CANCEL-Button
The value displayed is deleted by pressing the CANCEL button.
Heating Times
Output
Displays
Flame Temp [C°]
DISPLAY box (ON/OFF)
ON
A display box with ON or OFF is shown for options that can be
switched ON or OFF.
DISPLAY box (numerical)
328
A number is shown for values represented numerically.
SUBMENU-Button
Pressing the SUBMENU button takes the
user to the corresponding submenu.
ACTIVE-Button
The option shown is selected by pressing
the ACTIVE button.
INFO-box
This box provides information via the
adjacent value in the display box.
Advertisement
Table of Contents
