Service Manual
Model No: DE6060P1/DE6060G1/DE5060G1
STACKING INSTALLATION
You can use a stacking kit (included as an accessory) if you want to mount your dryer on the top of
a front load washing machine, ensure the washer is the same width as the dryer.
1. Remove 4 screws among screws on the bottom panel (see fig.1), and install the stacking kit
on the bottom panel (see fig.2).
4 Screws
Fig.1
2. Install the dryer with stacking kit on the top of the front load washing
machine (Fig.3). Drill two holes on both sides of washer with 2.9mm
diameter drill. Detailed drill position as shown on the stacking kit. Make
sure the included screws are used. Fix the stacking kit on the top
cover of washing machine, as shown on Fig.4.
Fig.3
Fig.2
Dryer
Stacking kit
Washer
7
stacking kit
Fig.4
Issue
Rev.