Fisher & Paykel DE6060P1 Service Manual page 19

Service Manual
Model No: DE6060P1/DE6060G1/DE5060G1
2.The laundry has not been dried thoroughly
Are the exhaust vent, air
intake grill and the lint filter
clogged
Is there too much laundry in
the dryer or the laundry is too
wet
Has the laundry became
twisted whilst drying
Check if the heater is heating
if so, the current will be about
8A(10 secs. after a Timed
Program)
Cut the power supply and then
take out of the top panel, Check
if the joint of the wire is well
Switch on the power, check if
the Voltage between A1 and
A2 is 230V
A2
A1
17
Issue
Rev.
Clean the exhaust vent, air
intake grill and the lint filter
Reduce the laundry in the
dryer or spin laundry in washer
then place back in dryer
Untwist the items and redry
Select the drying cycle and
redry the items
Rearrange the joint of wire
Replace the PCB