Fisher & Paykel DE6060P1 Service Manual page 8

Service Manual
Model No: DE6060P1/DE6060G1/DE5060G1
Warning: Ensure that the screw and nut of the Wall Hanging Brackets are
tightened during installation, if required. Regularly check all the
screws and nuts and tighten, if required. Do not overtighten.
3. Keep the exhaust grill at front of the dryer, Install the hooks to the dryer in the inverted
position. Remove the 2 screws and 2 plastic plugs as indicated in Fig.2.
Fig.2
4. Align the hooks as shown in fig.3 and refit screws tightly. Install the spacers provided in Fig.3.
Fig.3
5. With assistance, mount dryer on wall brackets. See Fig.4.
6. Remove the 2 screws sides of the box fastening the control board, then the control board
can be removed, remove the 6 screws fastening the control panel, then you can remove the control panel,
turn it 180 degrees again after installation to the control board, then the control board is fastened to the
box again, now the operation interface is reversal.
Caution:
Plug must be accesible after installation.
2 screws
2 plastic plugs
2 hooks
3 screws
2 spacers
Fig.4
6
Issue
Rev.