Change The Venting Mode - Fisher & Paykel DE6060P1 Service Manual

Service Manual
Model No. SDRY60

CHANGE THE VENTING MODE

There are three venting options:
Front venting
You can select front venting by use the exhaust grill.
Note: If the dryer is mounted on the wall advise you use the front venting option.
Rear venting
If you want to choose the rear venting mode, the exhaust grill at the front of the dryer
needs to be replaced with the outlet cover from the back panel of the dryer. Gently
open the grill, using a thin tool such as a key. Next, remove the cover from the
back panel and clip it into the grill space at the front panel. The exhaust grill is not
required when using a flexible hose.
Note: If the dryer used rear venting option without the flexible hose, it must be keeped
away from the wall not less than 50cm.
8
Issue
Rev.