Volume; Redial - AT&T 984 User Manual

984CIB_(Rev3)28.04.06
l l l
l l
j j j
j j
j j j
j j
4/28/06 6:28 PM Page 61

Volume

Handset/speakerphone/headset volume
control
When you are on a call, press VOLUME + to increase
call volume. Press VOLUME - to decrease volume.
You will hear a beep when you reach the minimum or
maximum level.
Ringer volume
When the phone is ringing, press VOLUME + or
VOLUME - to adjust the ringer volume. This phone
has four ringer volume levels. As you adjust the ringer,
you will hear the ring change.
Turning ringer off
You may turn the ringer on or off for each line. For
detailed instructions, see Turn the ringer on or off for
each line on page 27.

Redial

The last number dialed from this extension (up to 32 digits)
is stored in redial memory until you dial another number.
Handset
To dial the same number again, lift the handset, listen for
the dial tone, then press R.
Speakerphone or headset
To dial the same number again, press a LINE button, then
press R. The phone automatically dials the last
number.
NOTE: You must go off hook (lift handset or press a
LINE button for speakerphone or headset) before you
press R. If you press R without
going off hook, the screen displays the redial memory
stack. (See Redial stack on page 62.)
NOTE: You will experience a one-second delay
before the call is dialed when using the redial feature.
This is normal.
61