Private Lines - AT&T 984 User Manual

984CIB_(Rev3)28.04.06

Private lines

This feature allows you to set a private line (direct line) to the Line 4 jack of
each unit. In this case, all 16 units can have their own private lines, and the
connection of 16 units together adds up to a total of 19 telephone lines. The
table below shows an example of how 16 extensions are connected to add
up to 19 telephone lines.
EXT 11 ✔ ✔ ✔ ✔
EXT 12 ✔ ✔ ✔
EXT 13 ✔ ✔ ✔
EXT 14 ✔ ✔ ✔
EXT 15 ✔ ✔ ✔
EXT 16 ✔ ✔ ✔
EXT 17 ✔ ✔ ✔
EXT 18 ✔ ✔ ✔
EXT 19 ✔ ✔ ✔
EXT 20 ✔ ✔ ✔
EXT 21 ✔ ✔ ✔
EXT 22 ✔ ✔ ✔
EXT 23 ✔ ✔ ✔
EXT 24 ✔ ✔ ✔
EXT 25 ✔ ✔ ✔
EXT 26 ✔ ✔ ✔
NOTE: To program a private line in a line group, press E to begin
feature setup and then select SPECIALhOPTIONS. Enter the Line group
menu and select PRV to set the private line.
NOTE: If the unit (extension) is not set to PRV, the Line 4 status
indicator will be unable to display a correct line status.
130
4/28/06 6:28 PM
Telephone Lines (TLs) in System
TL1 TL2 TL3 TL4 TL5 TL6 TL7 TL8 TL9 TL10 TL11 TL12 TL13 TL14 TL15 TL16TL17 TL18 TL19
✔
✔
✔
Page 130
✔
✔
✔
✔
✔
✔
✔
To L4 jack
TL4 to TL19 are private lines
✔
✔
✔
✔
✔