Changing Settings; Reviewing Settings; Exit Remote Access - AT&T 7720 User Manual

ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE

Changing Settings

1 Connect with the answering system.
Press * 9. You will hear "To listen to settings, press 9," followed by
2
two beeps.
Press 9. You will hear the currently selected announcement,
3
followed by "To select a different announcement, press 6 or 4."
Press 6 or 4 to change the selected announcement. Press 9 to save
4
the setting.
5
The system announces the current Ring Select setting, followed by
"To change the number of rings or select toll saver, press 6 or 4."
Press 6 to increase number of rings, or 4 to decrease number of
6
rings. Press 9 to save the setting.
7
The system announces the current Message Alert setting, followed by
"To turn on or off, press 6 or 4."
Press 6 or 4 to change the setting. Press 9 to save the setting.
8
9
The system announces the current Remote Access Code, followed by
"To select the first digit, press 6 or 4, then press 9."
10 Press 6 to increase the first digit or 4 to decrease it, then press 9 to
save it. Continue in the same way for the second and third digits.
11 The system announces the Priority Calling Code, followed by "To
select the first digit, press 6 or 4, then press 9."
12 Follow Step 10 to change the Priority Calling Code.
13 The system announces the current base ringer setting, followed by
"To turn on or off, press 6 or 4."
14 Press 6 or 4 to change the setting. Press 9 to save the setting.
15 Press 5 to exit the set-up menu.

Reviewing Settings

1 Connect with the answering system.
Press 9. The system will announce the current settings.
2

Exit Remote Access

If you are using a touch tone phone, hang up the telephone. If you are
using the cordless handset, press a.
41