Table of Contents
Advertisement
ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE)
Recording a Memo
1
Connect with the answering system.
Press #, then enter the number of the mailbox where you want the
2
memo recorded, and begin speaking after the beep.
Press 5 when you are finished.
3
Setting The Clock
1
Connect with the answering system.
Press * 8. You will hear the current day, followed by "To change,
2
press 6 or 4. To change the hour, press 8."
Press 4 to move back a day, or 6 to move forward a day.
3
Press 8. The system announces the current hour setting, followed by
4
"To change press 6 or 4. To change the minutes, press 8."
Press 4 to decrease or 6 to increase hour.
5
6
Follow the same procedure to change the minutes setting.
7
The system announces the new day and time setting, then beeps twice
to indicate it is ready to accept a command.
Remote On/Off
Review ON/OFF Status
Connect with the answering system. Press 0. The system announces
the current status, then beeps twice and is ready to accept a command.
Turning System Off
1
Connect with the answering system.
Press * 0. The system announces "The machine is off," then beeps
2
twice to indicate it is ready to accept a command.
Turning System On
When the system is off, it answers after 10 rings, and announces "The
machine is off," then beeps twice to indicate it is ready to accept a
command. Press * 0. The system announces "The machine is on," then
beeps twice to indicate it is ready to accept a command.
Recording a Message When System is Off
Press # when the system answers after 10 rings. The system will beep to
signal you to begin speaking.
40
Advertisement
Table of Contents
