Installation; Base Installation - AT&T 2462 User Manual

2462_00_1 ATT CIB 1/28

Base Installation

1 Connect the power cord to the base and an electrical
outlet not controlled by a wall switch.
Use only the power cord supplied with this product.
If you need a replacement, call 1 800 222-3111.
2 Connect the corded handset to the base. Plug one end of the
coiled handset cord into the jack labeled
base (as shown below). Plug the other end into the handset.
3 Connect the telephone line cord(s).
• If you have a two-line jack, use only the black line cord.
Insert one end into the jack labeled LINE 1/L1 + L2 on the
underside of the base. Insert the free end into the two-line
modular jack. Make sure the cord snaps firmly into place.
Black line
cord
1/28/02 9:52 AM Page 3
Two-Line
modular
jack

INSTALLATION

on the underside of the
Standard
electrical
outlet
3