AT&T 2462 User Manual page 15

2462_00_1 ATT CIB 1/28
FEATURE SETTINGS
Number of Rings
Choose how many times the phone will ring before the system answers an
incoming call. You must set this feature for each line. If you set this
feature to TOLL SAVER (TS), the system answers after two rings when you
have new messages and after four rings when you have no new messages.
1
Press
SET
2 Press
3
Press
Day of the Week
Changing this setting for either mailbox changes the day of the week
for both mailboxes.
1
Press
SET
2
Press
3
When the desired day is highlighted, press
your selection.
Time
Changing this setting for either mailbox changes the time for both
mailboxes.
1
Press
SET
setting.
2
Enter the new time with the keypad. You can use
or
3 To change between AM or PM, move the cursor under the A or P.
Press 2 or * to set to A. Press 7 or # to set to P.
4
Press
Turn Audible Alert On/Off
When Audible Alert is turned on, the base beeps once every 10 seconds
when new messages have been received. This feature can be changed at
either mailbox and resets for both mailboxes. The system is pre-set to OFF
1
Press
2 Select the desired setting (ON or OFF), then press
to confirm your selection.
12
1/28/02 9:52 AM
or to select # OF RINGS:, then press
. The screen displays the current setting.
- +
or to change the number of rings.
SAVE
to confirm your selection.
or to select the day displayed, then press
. The screen displays the list of days.
or to scroll through the list.
or to select the time displayed, then press
. The screen displays SETTING TIME and the current
to move the cursor between digits.
SAVE
to store the displayed time.
to select AUD ALERT, then press
or
Page 12
OK
to confirm
OK
SET
.