Table of Contents
Advertisement
Getting started
Installation
You must install and charge
the battery before using the
cordless handset.
Install the telephone base close to a telephone jack and a power outlet not
or vertically mounted on the wall (page 15). For optimum range and better
reception, place the telephone base in a central and open location.
You may hear interference if your cellular phone is too close to the telephone
base during a CELLULAR call. Make sure that your Bluetooth enabled cellular
phone is within 15 feet of the telephone base in order to maintain a clear and
consistent connection between your Bluetooth cell phone, telephone base and
cell tower.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
telephone line cord and the telephone wall jack (page 10
noise and caller ID problems caused by DSL interference. Please contact your
Your product may be shipped with a protective sticker covering the handset or
telephone base display - remove it before use.
For customer service or product information, visit our website at
https://telephones.att.com
1 (866) 288-4268
Avoid placing the telephone base and charger too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock, such as on top of washing machine or
workbench.
or call
.
See pages 12-14 for easy
instructions.
1 (800) 222-3111
1
. In Canada, dial
Advertisement
Table of Contents
