AT&T 2462 User Manual page 12

2462_00_1 ATT CIB 1/28
Telephone Features Continued
Feature
Range Tone
(Handset only)
Set Pulse/Tone
(Base only)
Keypad Tone
Contrast
Rename
Range Extender
NOTE: Press O(CLEAR) on the handset or
time during feature setup to return to the previous screen.
1/28/02 9:52 AM Page 9
FEATURE SETTINGS
Directions
When you turn this feature on, the handset sounds a
warning tone when it is out of range of the base.
Use the softkeys to select OFF or ON, then press
OK
.
Set the base to match the kind of dialing service you
have—touch tone or dial pulse (rotary). You can set
Pulse/Tone separately for each line. Use softkeys to
select Line 1 or Line 2, then choose PULSE (dial
pulse) or DTMF (touch tone). Press
If you turn this feature on, the handset or base
sounds a tone every time you press a button.
Use the softkeys to select OFF or ON, then press
OK
.
You can adjust the display screen contrast level.
There are 15 contrast levels.
Use the softkeys to adjust the contrast, then press
OK
.
You can assign a name to the base or any registered
handset (instead of BASE or HANDSET 1, etc.)
Use the dial pad and the chart on page 22 to enter
the new location name, then press
confirm the new name.
Set this feature to ON or AUTO to moderately increase
the operating range or sound quality of your
registered handset(s). Set this feature to OFF to
conserve battery power. You can program this feature
at each handset individually or set all handsets to the
same option from the base.
Use + or - to scroll to the desired setting, then
OK
press .
NOTE: Only one handset can be actively in Range
Extender mode at any time.
OK
to save.
SAVE
to
on the base at any
9