End The Remote Access Call; Change Remote Access Code; Turn System Off - AT&T 1782 User Manual

ANSWERING SYSTEM OPERATION
From a Remote Touch Tone Phone

End the Remote Access Call

Press * 9. The system announces,"The machine will now hang up," and disconnects
from the line.

Change Remote Access Code

1 Connect with the answering system.
2 Press 9 9. The system announces,"Enter new code."
3 Enter your new Remote Access Code (any number between 000 and 999).
4 If a valid code is entered, the system announces the new Remote Access Code.
If an invalid code is entered, the system beeps rapidly five times, then beeps twice.
Repeat Steps 2 and 3.

Turn System Off

1 Connect with the answering system.
2 Press 8 0 to turn the system off for both lines
— OR —
Press 8 1 to turn the system off for Line 1
— OR —
Press 8 2 to turn the system off for Line 2.
36