Listen To Your Messages - AT&T 1782 User Manual

ANSWERING SYSTEM OPERATION

Listen to Your Messages

The screen displays the number of messages in each mailbox. To access messages for a
particular line, use the softkey to select L1 or L2, then follow the directions below to play,
repeat, skip, save, and delete messages.
As the system plays back messages, the screen displays the number of the message playing.
Before playing each message, the system announces the day and time the message was
received. The screen displays the caller's name and number, if stored. You can dial the
displayed number by pressing d (see "Display Dial" in the CALLER ID OPERATION
section for more information).
After playing the last message, the system announces,"End of messages."
Repeat a message Skip a message
Play all messages
Press P. (If you have no messages, the system announces,"No messages.")
Play new messages only
Press and hold P for about two seconds. (If you have no new messages, the
system announces,"No new messages.")
Repeat a message
Select << to repeat a message. Press the left softkey repeatedly to return to an earlier
message.
Repeat part of a message
Hold down << until you hear a beep. The more beeps you hear, the farther back in the
message you will be when you release the button.
Skip a message
Select >> to skip a message. Press the right softkey repeatedly to skip more than one
message.
Skip part of a message
Hold down >> until you hear a beep. The more beeps you hear, the farther into the
message you will be when you release the button.
31