Display Dial; Making A Display Dial Call; Display Dial Options - AT&T 1782 User Manual

CALLER ID OPERATION

Display Dial

NOTE: You must have a phone attached to the unit (see INSTALLATION) and you must
lift the receiver for this feature to work.
As you review calls in call history, you can dial a displayed phone number. If the call
information came from your Home Area Code (the one you programmed during
Installation), the screen displays only the seven-digit number you are calling (without an
area code). When you use Display Dial, the system dials the seven displayed digits. If the
call information came from outside your Home Area Code, the screen displays the seven-
digit number plus the area code. When you use Display Dial, the system dials the 10
displayed digits, plus the digit "1" when appropriate. (See "Home Area Code and Local
Area Code Guidelines" in SET UP SYSTEM FEATURES.)

Making a Display Dial Call

1 Press C or c to locate the number in the call history that you want
to dial.
2 Lift the receiver of the phone connected to the system.
3 Press d. The screen displays the name and number being dialed, but you
won't hear the number being dialed. (If you don't lift the receiver before pressing
d, the system will not dial the number. Instead the screen displays Lift
Receiver. You will need to repeat Steps 1 through 3.)
NOTE: If there is no number on the screen or the screen displayed Err, no number
can be dialed.

Display Dial Options

Use this feature if you need to check or change the way a number in call history
is dialed.
1 Press C or c to locate the number you want to call.
42