Other Programming; Call Restriction - Panasonic KX-TGH223AZ Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TGH223AZ:
Table of Contents

Advertisement

Programming

Other programming

Changing the handset name
The default handset name is "Handset 1" to
"Handset 6". You can customise the name
of each handset ("Bob", "Kitchen", etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 34).
1
MMENUN (right soft key) #104
2
Enter the desired name (10 characters
max.).
3
MOKN a M
N
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
MMENUN (right soft key) #105
2
MbN: Select the desired setting. a MOKN
a M
N
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 38) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
"09". If you make a call from the caller list to
the phone number "09-456-7890", the unit
dials "456-7890".
1
MMENUN (right soft key) #255
2
Enter an area code (5 digits max.). a
MOKN a M
N
Note for New Zealand:
R The use of this feature can prevent a
National Call from being dialled. E.g., in the
case of the South Island, the "03" will be
omitted and will therefore prevent a
34
TGH222_23AZ(en)_0109_ve001.pdf 34
National Call to other areas of the South
Island.

Call restriction

You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
MMENUN (right soft key) #256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R " " is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. " "
disappears.
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
N
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
"Enhanced". When "Enhanced" is selected,
is displayed. The default setting is
"Normal".
1
MMENUN (right soft key) #729
2
MbN: Selected the desired setting. a MOKN
3
M
N
Note:
R If you set repeater mode to "On"
(page 36):
1/9/2014 10:49:40 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tgh222az

Table of Contents