Alarm; Other Programming - Panasonic KX-TGC260E Operating Instructions Manual

Programming

Alarm

An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 15).
1
M N#720
2
MbN: Select the desired alarm. a MOKN
3
MbN: Select the desired alarm option. a
MOKN
"Off"
Turns alarm off. Go to step 9.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (10 characters max.).
a MOKN
7
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
28
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
8
MbN: Select the desired snooze setting.
a MOKN
9
MOKN a M N
Note:
R Press M N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.

Other programming

Changing the handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 4" is displayed.
1
M N#104
2
Enter the desired name (10 characters
max.). a MOKN
3
MbN: Select the desired setting. a MOKN
2 times a M
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M N#256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, see page 41.
N to stop the
N