Symbols In The Display; Connecting The Mobile Phone To The Hands-Free System - Skoda 2013 Rapid Owner's Manual

Button/adjust-
ment Action
wheel » Fig. 82
Turn upwards
2
Turn downwards
2
a) Valid for vehicles with the Amundsen+ navigation system.
b)
Valid for vehicles without the Amundsen+ navigation system.

Symbols in the display


First read and observe the introductory information and safety warn-
ings on page 85.
The following symbols are displayed in the Maxi DOT display:
Symbol
Charge status of the phone battery

Signal strength

a phone is connected to the hands-free system.

The hands-free system is visible to other devices.

A multimedia unit is connected to the hands-free system.

a) This function is only supported by some mobile phones.

Connecting the mobile phone to the hands-free system


First read and observe the introductory information and safety warn-
ings on page 85.
To connect a mobile phone with the hands-free system, the two devices must be
paired. Detailed information on this is provided in the operating instructions for
your mobile phone.
1)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the navi-
gation system menu; refer to the » operating instructions for the Amundsen+ navigation system.
®
2) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN
(SSP) is either displayed, or the PIN 1234 has to be entered manually.
3) Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
tion is completed by inputting a PIN number. If the authorisation input is required, it must always be
performed when re-establishing the Bluetooth connection.
88
Using the system
Meaning
a)
a)
Operation
Increase the volume
Decrease volume
The following steps must be carried out for pairing
›
Activate Bluetooth
›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until the
hands-free system has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN 2) .
›
If the hands-free system announces (as standard SKODA_BT) on the display of
the mobile phone, enter the PIN
tion is established 3)
›
To finish pairing in the MAXI DOT display, confirm the creation of the new user
profile.
If there is no free space available to create a new user profile, delete an existing
user profile.

During the connecting procedure, no other mobile phone may be connected with
the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby on-
ly one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes af-
ter the ignition is switched on and is also deactivated when the mobile phone has
connected to the hands-free system.
®
connec-
.
1)
®
and the visibility of your mobile phone on your telephone.
within 30 seconds and wait, until the connec-
2)
.

