Skoda 2013 Rapid Owner's Manual page 123

Note
On the bottom of the key is a code number. If you lose a key, please contact a
specialist garage, who will be able to use this code number to provide you with a
new one.
Adjusting the ready position
Fig. 105 Setting the ready position
Fig. 106 Ready position

First read and observe the introductory information and safety warn-
ings on page 119.
Always adjust the ball head in the ready position before fitting.
›
Turn the key in direction of the arrow
A
›
Hold the tow bar with your left hand.
120
Driving
to the stop » Fig. 105.
1
›
Using your right hand, pull the handwheel
and drag in the direction of the arrow
The handwheel remains locked in this position.
Ready position » Fig. 106

The key is in the unlocked position - the arrow on the key points to the
C

"padlock open" icon . The key cannot be removed.
The locking balls can be pushed fully into the tow bar.
D

The red marking on the handwheel points to the white marking on the
E

ball bar.
There is a clear gap of approx. 4 mm

bar.
The tow bar is now ready to be inserted into the mounting recess.
WARNING
If the tow bar cannot be correctly placed in the ready position, then it must
not be used.
CAUTION
When in the ready position, the key cannot be removed from the handwheel lock.
in the direction of the arrow
B
to the stop.
3
between the handwheel and the tow
F
2
