Headlight Lenses; Door Lock Cylinders; Cavity Protection; Wheels - Skoda 2013 Rapid Owner's Manual

When drying the windows after washing the vehicle, do not use window leathers
that have been used to polish the bodywork. Residues of preservatives in the
window leather can make the window dirty and reduce visibility.
CAUTION
The ice scraper should not be moved forward and backward but in one direction
■
to avoid any damage to the surface of the glass.
Snow or ice that is contaminated with coarse dirt such as fine gravel, sand or
■
salt must not be removed from the windows and mirrors – there is a risk of dam-
age to the surface of the windows and mirrors.
Do not remove snow or ice from glass parts using warm or hot water – risk of
■
cracks forming in the glass.
When removing snow or ice from windows and mirror lenses ensure that the
■
paintwork of the vehicle is not to damage.
Do not clean the inside of the windows with sharp-edged objects or corrosive
■
and acidic cleaning agents – there is a risk of damaging the heating elements or
window aerial.

Headlight lenses


First read and observe the introductory information and safety warn-
ings on page 153.
Clean plastic front headlight lenses using clean, warm water and soap.
CAUTION
Never wipe headlights with a dry cloth.
■
Do not use any sharp objects to clean the plastic lenses, as this may damage
■
the protective paintwork and consequently cause cracks to form on the headlight
lenses.
Do not use any harsh cleaning products or chemical solvents to clean the head-
■
lights, as this could damage the headlight lenses.

Door lock cylinders


First read and observe the introductory information and safety warn-
ings on page 153.
Specific products must be used for de-icing door lock cylinders.
156
General Maintenance
CAUTION
When washing your vehicle, ensure as little water as possible gets into the lock-
ing cylinders.

Cavity protection


First read and observe the introductory information and safety warn-
ings on page 153.
All the cavities of your vehicle which are at risk from corrosion are protected for
life by a layer of protective wax applied in the factory.
This wax protection does not need to be inspected or re-applied.
If any small amount of wax flow out of the cavities at high temperatures, these
must be removed with a plastic scraper and the stains cleaned using a petroleum
cleaner.

WARNING
Safety regulations should be observed when using petroleum cleaner to re-
move wax – risk of fire!

Wheels


First read and observe the introductory information and safety warn-
ings on page 153.
Wheel rims
Also thoroughly wash the wheel rims when washing the vehicle on a regular ba-
sis.
Regularly remove salt and brake abrasion, otherwise the rim material will be cor-

roded.
Damage to the paint layer on the wheel rims must be touched up immediately.
Light alloy wheels
After washing thoroughly and treat the wheel rims with a protective product for
light alloy wheels. Products which cause abrasion must not be used to treat the
wheel rims.


