do not continue to drive! Stop the vehicle, switch off the engine, and wait until
the
icon goes out - risk of gearbox damage! You can continue your journey as
soon as the symbol disappears.
If you have to stop for technical reasons, then park the vehicle at a safe dis-
tance from the traffic, switch off the engine and switch on the hazard warning
» page
Note
If the MAXI DOT display shows warning messages, these messages must be
■
confirmed in order to access the main menu
system .
As long as the operational faults are not rectified, the symbols are always indi-
■
cated again. After they are displayed for the first time, the symbols continue to be
indicated without any extra messages for the driver.
Indicator lights
Introduction
This chapter contains information on the following subjects:
Handbrake
14
Using the system
» page
22, Using the information
The indicator lights show the current status of certain functions/faults and may
be accompanied by audible signals.
WARNING
Ignoring illuminated indicator lights and related messages or instructions in
■
the instrument cluster display may lead to serious personal injury or damage
to the vehicle.
If you have to stop for technical reasons, then park the vehicle at a safe dis-
■
tance from the traffic, switch off the engine and switch on the hazard warning
lights
» page
44. The warning triangle must be set up at the prescribed dis-
tance - observe the national legal provisions when doing so.
The engine compartment of your car is a hazardous area. The following
■
14
warning notes must be followed at all times when working in the engine com-
15
partment
» page
162, Engine compartment.
15
15
15
Handbrake
16
16
17
ings
on page 14.
17
The warning light
comes on if the handbrake is applied.
17
18
seconds while the handbrake is applied.
18
18
18
18
19
19
19
20
20
20
20
21
21
21
21