Skoda 2013 Rapid Owner's Manual page 204

Hide thumbs Also See for 2013 Rapid:
Table of Contents

Advertisement

CAUTION
Do not take hold of the glass bulb with naked fingers (even the smallest amount
of dirt reduces the working life of the light bulb). Use a clean cloth, napkin, or sim-
ilar.
Note
This Owner's Manual only describes the replacement of bulbs where it is possi-
ble to replace the bulbs on your own without any complications arising. Other
bulbs must be replaced by a specialist garage.
We recommend that a box of replacement bulbs always be carried in the vehi-
cle. Replacement bulbs can be purchased from ŠKODAOriginal Accessories.
We recommend having the headlight settings checked by a specialist garage af-
ter replacing a bulb in the main, low or fog beam.
Consult a specialist garage in the event of a failure in a xenon gas discharge
lamp.
Bulb arrangement in the headlights
Fig. 170 Principle sketch: Headlight with halogen bulb/with Xenon bulb
First read and observe the introductory information and safety warn-
ings
on page 200.
Headlight with halogen bulb
Low beam
1
Main beam, separate daytime running lights, and parking light
2
Turn signal light (at the front)
3
Headlights with Xenon light
Low beam with Xenon light
4
Main beam, separate daytime running lights, and parking light
5
Turn signal light (at the front)
6
Replacing the low beam bulb
First read and observe the introductory information and safety warn-
ings
on page 200.
Remove the rubber cover
1
Remove the connector with the bulb by jiggling it out in the direction of the ar-
row
» Fig.
171.
Remove the connector.
Insert a new light bulb in such a way that the fixing lugs of the bulb fit in the
recesses of the reflector.
Attach the connector.
Insert the rubber cover
» Fig. 170
1
Fig. 171
Headlight with halogen bulb:
Bulb for low beam
» Fig. 170
on page 201.
on page 201.
Fuses and light bulbs
201

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents