Night Owl 10 Series User Manual page 59

CHAPTER 8:
REMOTE ACCESS
particular router may be different than the below but the same principles
will apply:
Application Name: create a unique name for your NVR system.
•
Public Port: select the port to forward: Media Port (9000), Web
•
Port (2049 or 2051), or Server Port (2050).
Private Port: set to the same number you entered for the Public
Port.
Port Type/Protocol: if your router has an option for both, use TCP
•
and UDP. If your router allows either TCP or UDP port types, use
TCP.
Host IP Address: set to your DVR IP address ending in 150 that you
•
wrote down earlier.
Once you have forwarded the necessary ports on your router, you should
check to make sure they have been correctly forwarded.
1. Go to http://www.yougetsignal.com/tools/open-ports/.
2. Type in port 9000 and select the Check button to see if the port is open
or closed.
3. Type in port 2049 or 2051 and select the Check button to see if the port
is open or closed.
4. All ports should be open. If any ports test as closed, that port is not
forwarded correctly.
For more information on this product visit www.NightOwlSP.com
Write you external address in the User Information
section at the end of the manual.
59