Night Owl 10 Series User Manual page 15

CHAPTER 4:
CAMERA INSTALLATION
3. Using a drill bit slightly smaller than the included screw anchors,
drill into the mounting surface using the guide marks you placed in
the previous step.
4. Insert the screw anchors.
5. Line up the camera base holes with the screw anchors. Holding
the base in place, insert screws and tighten until secure.
6. Once the base is screwed in place, make sure that the camera is
securely mounted by placing gentle pressure on the mount.
7. Adjust the camera housing to point in the direction of the area you
would like to monitor.
For more information on this product visit www.NightOwlSP.com
Don't feel like installing the system yourself?
Let InstallerNet™ do the work for you.
Contact us at 1-800-806-5513 or visit us at
www.NightOwlSP.com.
15