Night Owl 10 Series User Manual page 29

CHAPTER 7:
MENUS AND SETTINGS
DHCP: the most common network connection type. These values
will be gathered automatically from your ISP when connected.
Static: modify these values if you are using a static IP address.
Information can be obtained from your router and ISP.
Media Port: allows access to your NVR from a mobile device. The
default value of 9000 should generally be used for all use cases.
Web Port: allows access to your NVR with your computer through
your LAN or the Internet. In most cases the default value of 2049
or 2051 will provide the most optimal connectivity.
IP Address: network address of the connected NVR.
Subnet Mask: the range of IP addresses that can be found in the
network. This should always be set to the default address
255.255.255.000.
Gateway: the connection between two networks. This should be
always be the IP address of the connected router.
DNS1: primary Domain Name System server address.
DNS2: secondary Domain Name System server address.
UPNP: Enable or Disable Universal Plug and Play abilities
depending on your network device capabilities.
b. Switch:
For more information on this product visit www.NightOwlSP.com
29