Night Owl 10 Series User Manual page 57

CHAPTER 8:
REMOTE ACCESS
2. Confirm that the Subnet Mask is set to 255.255.255.000.
3. Enter the "Default Gateway" number from the prior section into the
Gateway field. Again you will need to add placeholder zeros in any
sections that do not contain three digits e.g. 192.168.1.1
192.168.001.001.
4. Verify that both DNS1 and DNS2 fields are automatically populated.
5. Click the Save button to apply all changes.
6. Reboot or power cycle the NVR.
For more information on this product visit www.NightOwlSP.com
Write these addresses down in the User Information
section at the end of the manual for future reference.
57