Scan Using The Scan Button On Your Fuji Xerox Machine; Scan Using The Scan Button On The Machine - Fuji Xerox DocuPrint M225 dw Basic User's Manual

Scan Using the Scan
Button on Your Fuji
Xerox Machine
Scan Using the Scan Button
on the Machine
1
Do one of the following:
• Place the document face up in the
ADF.
(If you are scanning multiple pages,
we recommend using the ADF.)
• Place the document face down on
the scanner glass.
2
Press (Scan).
3
Press a or b to display the Scan to PC
option, and then press OK.
4
Press a or b to display the File option,
and then press OK.
5
If the machine is connected to a
network, press a or b to display the
computer where you want to send the
document, and then press OK.
6
Do one of the following:
• To change the scan settings for this
document, press a or b to select Yes,
and then press OK. Go to the next
step.
• To use the default scan settings,
press a or b to select No, and then
press OK. Press Start.
The machine starts scanning. If you
are using the machine's scanner
glass, follow the LCD instructions to
complete the scanning job.
• In order to change scan settings, Fuji
Xerox's Control Center software must
be installed on a computer connected
to the machine.
7
Select the scan settings you want to
change:
• Scan Type
• Resolution
• File Type
• Scan Size
• Remove Bkg. Clr
(available only for the Color and
Gray options.)
8
Press Start.
The machine scans the document.
27