Understanding Program Schedules; Progressive Recovery - Aprilaire Home Comfort Control 8830 Owner's Manual

PROGRAM SCHEDULE AND HOLDS

UNDERSTANDING PROGRAM SCHEDULES

The daily schedule is split into four sections:
WAKE: Temperature you would prefer to wake up to .
LEAVE: Temperature when you are away from the house .
RETURN: Temperature you would prefer to return home to .
SLEEP: Temperature you would prefer while sleeping .
The times shown in the table below are the defaults . The start time and temperature of each section can be changed
to fit your schedule . (See Changing Program Schedules section on pages 26-27 .)
This Home Comfort Control is pre-set to use the following program settings (see table below) . We recommend these
settings, since they can reduce your heating/cooling expenses . The fan program is pre-set to AUTO for all events .
Event designator Start time
WAKE 6:00AM
LEAVE 8:00AM
RETURN 5:00PM
SLEEP 10:00PM
24
Setpoint
Heat Cool
70°F (21°C) 78°F (25 .5°C)
62°F (16 .5°C) 85°F (29 .5°C)
70°F (21°C) 78°F (25 .5°C)
62°F (16 .5°C) 82°F (27 .5°C)
PROGRAM SCHEDULE AND HOLDS
UNDERSTANDING PROGRAM SCHEDULES
Use the table below to assist in modifying the schedule .
Event designator
WAKE
LEAVE
RETURN
SLEEP

PROGRESSIVE RECOVERY

The Progressive Recovery feature allows the Home Comfort Control to activate the heating and cooling equipment
Fan
PRIOR to a scheduled event in order to reach the desired temperature at the start of that scheduled event .
AUTO
Example: If the WAKE time is 6 am, and the Heat Setpoint is 70°F, the heat will come on before 6 am, so the
temperature is 70°F by the time you wake at 6 am .
AUTO
AUTO
AUTO
(CONTINUED)
Setpoint
Start time Heat Cool Fan
25