Aprilaire 8830 Safety & Installation Instructions

Aprilaire 8830 Safety & Installation Instructions

Touch screen wi-fi automation thermostat with integrated indoor air quality solutions, includes wired outdoor temperature sensor
Hide thumbs Also See for 8830:

Advertisement

READ AND SAVE THESE INSTRUCTIONS
Safety &
Installation
Instructions

TABLE OF CONTENTS

WI-FI SETUP
Wi-Fi Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermostat mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Equipment control module mounting . . . . . . . . . . . . . . 4
Thermostat wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote temperature sensor (optional) . . . . . . . . . . . . . 5
Support module wiring . . . . . . . . . . . . . . . . . . . . . . . . . 5
Equipment control module wiring . . . . . . . . . . . . . . . . . 6
Outdoor temperature sensor (included) . . . . . . . . . . . . . 7
and humidity sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Conventional heat/cool single transformer . . . . . . . . . . 9
Conventional heat/cool two transformer . . . . . . . . . . . 9
Heat pump single transformer . . . . . . . . . . . . . . . . . . . 10
Heat pump two transformer . . . . . . . . . . . . . . . . . . . . 10
Model 8830 Touch Screen
Wi-Fi Automation Thermostat
with Integrated Indoor
Air Quality Solutions
INCLUDES WIRED OUTDOOR TEMPERATURE SENSOR
INDOOR AIR QUALITY WIRING DIAGRAMS
Power and reset options . . . . . . . . . . . . . . . . . . . . . . . 12
Equipment type selection switch (SW1) . . . . . . . . . . . 13
Installer setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Change system settings . . . . . . . . . . . . . . . . . . . . . . . . 13
Air cleaning system settings table . . . . . . . . . . . . . . 16
Humidifier system settings table . . . . . . . . . . . . 16-17
Dehumidifier system settings table . . . . . . . . . . . . . 17
Ventilation system settings table . . . . . . . . . . . . . . . 18
System test menu . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
System test tables . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
REFERENCES
Quick reference to controls & display . . . . . . . . . . 23-24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Thermostat features . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Advertisement

Table of Contents
loading

Summary of Contents for Aprilaire 8830

  • Page 1: Table Of Contents

    Model 8830 Touch Screen Wi-Fi Automation Thermostat with Integrated Indoor Air Quality Solutions INCLUDES WIRED OUTDOOR TEMPERATURE SENSOR READ AND SAVE THESE INSTRUCTIONS Safety & Installation Instructions TABLE OF CONTENTS WI-FI SETUP INDOOR AIR QUALITY WIRING DIAGRAMS Indoor Air Quality wiring with separate transformers . . 11 Wi-Fi Setup .
  • Page 2: Wi-Fi Setup

    WI-FI SETUP INSTALLATION To connect the 8830 thermostat to a Wi-Fi network follow the steps below . THERMOSTAT INSTALLATION LOCATION RECOMMENDATIONS Note: You will need a computer or mobile device with Wi-Fi and a web browser . Thermostat should be mounted: Do not mount thermostat: •...
  • Page 3: Equipment Control Module Mounting

    INSTALLATION INSTALLATION EQUIPMENT CONTROL MODULE MOUNTING REMOTE TEMPERATURE SENSOR (OPTIONAL) A remote temperature sensor can be used for control if the thermostat is to be mounted in a concealed location The Equipment Control Module has the following features to simplify mounting and wiring and provide for a clean and neat installation .
  • Page 4: Equipment Control Module Wiring

    INSTALLATION INSTALLATION EQUIPMENT CONTROL MODULE WIRING OUTDOOR TEMPERATURE SENSOR (INCLUDED) Outdoor temperature can be measured by installing an 8052 sensor to the ODT terminals and enabling the outdoor sensor in the installer set-up menu . When an outdoor sensor is installed, the features below will be enabled . In heat pump mode the outdoor temperature sensor can be used to efficiently utilize an air source heat pump: •...
  • Page 5: Return Air Temperature Sensor (Optional)

    CONVENTIONAL HEAT/COOL TWO TRANSFORMER (REMOVE JUMPER) the sensor to report false temperature readings . 1 . Locate the Aprilaire Model 8052 sensor in the supply trunk, after the heat exchanger and cooling coils . (See shaded areas in figure below .) 2 .
  • Page 6: Hvac Wiring Diagrams

    HVAC WIRING DIAGRAMS INDOOR AIR QUALITY WIRING DIAGRAMS HEAT PUMP SINGLE TRANSFORMER (USE JUMPER WIRE) INDOOR AIR QUALITY WIRING WITH SEPARATE TRANSFORMERS TRANSFORMER HUMIDIFIER HEAT PUMP TRANSFORMER THERMOSTAT DHnc HEATING HEATING DEHUMIDIFIER TRANSFORMER REVERSING VALVE NORMALLY COMPRESSOR CLOSED DAMPER COMPRESSOR TRANSFORMER REVERSING VALVE PILOT RELAY FOR...
  • Page 7: Power & Reset Options

    POWER & RESET OPTIONS SETUP & TESTING The equipment control module is powered from 24VAC . EQUIPMENT TYPE SELECTION SWITCH (SW1) The thermostat is powered from the equipment control RESET module . In the case of power loss the thermostat will This thermostat has the option of being used in heat BUTTON maintain the clock for 24 hours .
  • Page 8: Thermostat Installer System Settings Table

    Heat/Cool . Cool Only automation system or Aprilaire mobile and web apps . The predefined setpoint(s) is set by the user in the 05 . Heat/Cool: Cooling Stages Heat/Cool: Number of Cooling Stages .
  • Page 9: Indoor Air Quality System Settings Tables

    Outdoor Sensor, will be presented prior to entering the Indoor Air Quality system settings . (Change Water Panel Determines the first month the “Change Water Panel” March Please refer to the Model 8830 Owner’s Manual for further information about thermostat features . Reminder set to 2 Per message is displayed . April...
  • Page 10: Ventilation System Settings Table

    SETUP & TESTING SETUP & TESTING Ventilation System Settings Table SYSTEM TEST MENU Factory default setting (bold) The system test menu is used to test a system after installation . The outputs of the thermostat can be manually System setting Description and setting range activated to test their function .
  • Page 11: System Test Tables

    SETUP & TESTING SETUP & TESTING SYSTEM TEST MENU SYSTEM TEST TABLES (CONTINUED) (CONTINUED) While the equipment test is active the corresponding test information will be shown . Heat Pump Heating Equipment Test (Electric Heat) Press [NEXT] to accept the selection and proceed to the next test selection . Compressor Stages Stages...
  • Page 12: Quick Reference To Controls & Display

    SETUP & TESTING QUICK REFERENCE TO CONTROLS & DISPLAY SYSTEM TEST TABLES HOME SCREEN (CONTINUED) ROOM TEMPERATURE CURRENT DAY OUTDOOR TEMPERATURE ROOM RELATIVE HUMIDITY TEMPERATURE SETTING Heat / Cool Cooling Equipment Test AIR CLEANING BUTTON FAN MODE ™ (ENTERS EVENT-BASED SETTING 1st Stage Test CLEANING CONTROL SCREEN)
  • Page 13 QUICK REFERENCE TO CONTROLS & DISPLAY TROUBLESHOOTING EQUIPMENT CONTROL MODULE LEDs DISPLAY IS BLANK HEAT PUMP ISSUES COOL AIR IN HEAT MODE, OR WARM AIR IN COOL MODE If Power LED not illuminated at the equipment control POWER/STATUS – On solid during normal operation . Flashes •...
  • Page 14: Troubleshooting

    HVAC service reminders . – Ventilation with temperature and humidity limits . Aprilaire account this indicates that the thermostat cannot connect to the Aprilaire • Programmable fan control with fan circulation mode .
  • Page 15: Specifications

    P .O . Box 1467 • Madison, WI 53701-1467 • Phone: 800/545-2219 • Fax: 608/257-4357 www.aprilairepartners.com 61001136 2 .17 U .S . Patent Numbers 8,146,376, 8,596,078 and other patents pending . B2206509D © 2017 Aprilaire – A division of Research Products Corporation...

Table of Contents