Program Schedule And Holds; Set Time And Date; Understanding Program Schedules - Aprilaire 8620W Owner's Manual

PROGRAM SCHEDUlE AND HOlDS

SET TIME AND DATE

Press [MENU] to enter the main menu .
Press [SET ClK/DATE] to enter clock menu .
20
Press or to set the hour .
Press [Next], then or to set the minute .
Press [Next], then or to set the month .
Press [Next], then
or to set the day .
Press [Next], then or to set the year .
Press [DONE] to save and exit, Or [CANCEl] to exit
without saving . The thermostat will save and exit if
nothing is pressed within 20 seconds .
Note: Once the thermostat connects to the cloud,
the time and date will be updated periodically. The
thermostat will automatically update for daylight savings .
PROGRAM SCHEDUlE AND HOlDS

UNDERSTANDING PROGRAM SCHEDUlES

The daily schedule is split into four sections:
WAKE: Temperature you would prefer to wake up to .
lEAVE: Temperature when you are away from the house .
RETURN: Temperature you would prefer to return home to .
SlEEP: Temperature you would prefer while sleeping .
The times shown in the table below are the defaults. The start time and temperature of each section can be changed
to fit your schedule. (see changing Program schedules section on pages 23-24.)
This thermostat is pre-set to use the following program settings (see table below). We recommend these settings,
since they can reduce your heating/cooling expenses . The fan program is pre-set to AUTO for all events .
Event designator Start time
WAKE 6:00AM
LEAVE 8:00AM
RETURN 5:00PM
sLEEP 10:00PM
Set temperature
Heat Cool
70°F (21°C) 78°F (25 .5°C)
62°F (16 .5°C) 85°F (29 .5°C)
70°F (21°C) 78°F (25 .5°C)
62°F (16 .5°C) 82°F (27 .5°C)
Fan
AUTO
AUTO
AUTO
AUTO
21