Table of Contents
Advertisement
PROGRAM SCHEDULE AND HOLDS
PROGRAM SCHEDULE HOLDS – VACATION
Press [Next], then [FAN] to set the fan mode .
32
(CONTINUED)
Press [Next], then
or
to set end date .
Press [Next], then
or
to set end time .
Press [DONE] to save and exit, or [CANCEL] to exit
without saving . The Home Comfort Control will save and
exit if nothing is pressed within 20 seconds .
WI-FI MAINTENANCE AND TROUBLESHOOTING
CLEARING ROUTER SETTINGS
If you purchase a new Wi-Fi router or change the
security settings on your existing router, the router
settings in the Home Comfort Control need to be
cleared so the new Wi-Fi router settings can be
entered . To do this, enter the user system settings as
described in the Setup Menu section on pages 36-40 .
Change the setting for WiFi Disconnect and Clear
Settings to Yes and then press [DONE] . This will
remove all the previous Wi-Fi settings . Refer to Wi-Fi
Setup on pages 7-8 for instructions on connecting the
Home Comfort Control to your Wi-Fi Network .
REMOVING THE HOME COMFORT CONTROL
FROM A my.aprilaire.com ACCOUNT
The Home Comfort Control can only be registered to
one web and mobile app account . If you need to remove
the Home Comfort Control from an existing account so
it can be registered to a new account, it can be done at
the Home Comfort Control . This may need to be done
for instance if you have purchased a home with the
Home Comfort Control and need to remove the Home
Comfort Control from the previous owner's account and
register it to your account . To do this, enter the setup
menu as described in the following section . Change
the setting for Unregister the Thermostat to Yes and
then press [DONE] . This will remove the Home Comfort
Control from any account that it is currently registered
to . Refer to Wi-Fi Thermostat App User Guide and
then Start Up on my.aprilaire.com for instructions
on registering the Home Comfort Control to a new
my.aprilaire.com account .
33
Advertisement
Table of Contents
Troubleshooting
