Appendix - Denon DRA-100 Owner's Manual

Contents Connections
o No sound comes out
Symptom
No sound comes out of
0
speakers.
0
0
0
0
0
0
0
0
0
0
0
Front panel Rear panel
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for
looseness.
Check that a proper input source is selected.
Adjust the volume.
Cancel the mute mode.
Check that the correct input source is selected when audio is being input to this unit from an external
device.
Check the digital audio output setting on the connected device. The initial settings may be off depending
on the device.
Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this
unit.
No sound is output from the speakers when headphones are connected.
Remote control
unit
Settings
Cause / Solution
94
Index
Tips

Appendix

Page
17
－
－
－
17
30
31
31
54
54
54
9