Denon DRA-100 Owner's Manual page 81

Contents Connections
Notes concerning use of "Update" and "Add New Feature"
In order to add new functions, the environment and settings required
0
for connecting to broadband internet are needed. (v p. 25)
Perform the add new feature operation after at least 2 minutes has
0
elapsed since turning this unit's power on.
Do not turn off the power until updating or upgrading is completed.
0
Even with a broadband connection to the Internet, approximately 20
0
minutes is required for the updating/upgrading procedure to be
completed.
Once updating/upgrade starts, normal operations on this unit cannot
0
be performed until updating/upgrading is completed. Furthermore,
updating/upgrading the firmware may reset the backup data for the
parameters, etc. set for this unit.
When the update or upgrade failed with a message such as "Update
0
failed" and "Download failed", remove and re-insert the power cord.
"Update Retry" appears on the display and update restarts from the
point at which update failed. If the error continues despite this, check
the network environment.
0 Information regarding the "Update" function and "Add New Feature" will be
announced on the Denon web site each time related plans are defined.
Front panel Rear panel
Playback Settings
Reset
Perform this procedure if the display is abnormal or if operations cannot be
performed. Various settings are reset to the factory default values. Make
settings again.
Cancel:
Reset factory defaults:
Remote control 81
unit
Tips
Values are not reset.
Values are reset.
Index
Appendix