Denon DRA-100 Owner's Manual page 12

Contents Connections
q
o r
A Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 17)
B SUBWOOFER OUT connector
Used to connect a subwoofer with a built-in amplifier. (v p. 18)
C DIGITAL IN connectors
Used to connect devices equipped with digital audio connectors.
"Connecting a digital device (Optical)" (v p. 20)
0
"Connecting a digital device (Coaxial)" (v p. 21)
0
D AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 28)
E AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v p. 22)
Front panel Rear panel
Playback
w e
t y u y i o
Remote control
unit
Settings
F Wi-Fi connect buttons (iOS/WPS)
Used to connect to the wireless LAN.
(See the separate "Quick Setup Guide".)
G NETWORK connector
Used to connect this unit to the network. (v p. 25)
H ANALOG IN connectors
Used to connect devices equipped with analog audio connectors.
(v p. 19)
I Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 26)
1. Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
2. Turn clockwise until the antennas is fully connected.
3. Rotate the antenna upwards for best reception.
1
12
Index
Tips Appendix
2 3