Denon DRA-100 Owner's Manual page 86

Contents Connections
n Auto-Scan
This automatically searches for networks.
1
From the list of the networks, select the one you want
to connect to.
Select "Rescan" if the network cannot be found.
0
2
Make the following settings.
Default Key:
Password:
DHCP/Proxy:
Test Connection:
Front panel Rear panel
Playback
Select the default key.
When connecting to a WEP
0
encrypted network, "Default Key"
menu is displayed.
Input the password.
Performs the DHCP and proxy setting.
("DHCP" (v p. 84),
"Proxy" (v p. 85))
Test the connection.
Remote control
unit
Settings
n Share Wi-Fi setting from an iOS device
You can use an iOS device such as an iPhone or iPad to configure Wi-
Fi settings.
After selecting this item, select Settings/Wi-Fi from the iOS device
home screen, select "Denon DRA-100" displayed at the bottom of the
screen, and then follow the setting instructions displayed on the iOS
device.
For details, see the "Quick Setup Guide".
0 The iOS version must be 7 or later.
n WPS (Wi-Fi Protected Setup)
1
Register the PIN code of the unit in the router.
86
Index
Tips Appendix