Connecting A Digital Device (Optical) - Denon DRA-100 Owner's Manual

Contents Connections

Connecting a digital device (Optical)

You can connect this unit to devices with digital audio output.
NOTE
0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this device.
0 Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into this device. Doing so may cause noise, which may cause damage to the
speakers.
Front panel Rear panel
Playback Settings
Digital
device
OPTICAL
OUT
Remote control 20
unit
Tips
Index
Appendix