Denon DRA-100 Owner's Manual page 61

Contents Connections
o Remote Play operations
Operations are different for each device, but the procedures for
preparing for Remote Play are the same. The preparation procedures
are shown below.
1
Turn on this unit.
Make sure that this unit is connected to the network.
0
2
Display the music file playback screen on DMC.
For PC, open Windows Media Player 12, etc.
0
For smartphones, switch to the music file playback mode.
0
3
Select the friendly name of this unit for the item that
sets the playback device on the playback screen.
The default Friendly Name of this unit is "Denon DRA-100".
0
4
Start playing back a music file on DMC.
The function on this unit automatically switches to "Music Server"
0
and the Remote Play mark m appears on the display. Remote
Play starts.
Front panel Rear panel
Playback Settings
0 Press o to exit Remote Play mode.
NOTE
0 During Remote Play, you cannot perform playback operations with this unit. Use
the DMC device for these operations.
Remote control 61
unit
Tips
Index
Appendix